Vacuum Cleaning

VACUUM CLEANING TIPS

PURPOSE:
To provide clean, long-lasting and attractive carpeted areas.

PROCEDURE
1. Prepare Area.Take carpet vacuum equipment to the work site.
   Place a "Caution" sign in a prominent location.
   
2. Set up equipment.
   Plug in machine and place in a central location. Be sure equipment has a three prong plug. To move tank type equipment short distances, pull by the hose. To move longer distance, rewind cord and push the vacuum itself. Take care not to bump walls or furniture. Vacuum carpet. Generally use a push-pull stroke about 3' long. Vacuum so that the nap of the carpet is laid by the pull stroke. Overlap strokes slightly until area is covered. Use the accessory tools for hard-to-get-spots. Move furniture and equipment as little as possible. Do not over clean. Usually two strokes per pass are sufficient. Watch cord carefully as it can present a safety hazard. Work away from the wall with the cord plug outlet to help avoid being tangled in cords.
   
3. When finished:
   Remove the "Caution" sign. Return vacuum equipment to the storage area. Check to make sure that the filter bags are not full. If they are full, empty the bag or replace it with a new disposable bag. Also check for worn brushes or brush strips and replace immediately.
   
4. Clean up
   Wipe the vacuum unit and cord clean of any loose dust or soil.
   

REQUIRED SUPPLIES & EQUIPMENT
Upright type vacuum or vacuum with hose, wand, carpet cleaning tool and dusting brush, "Caution" sign